How To Register Razer Kraken 7.1 Headset

Mutual Questions

What's the difference betwixt Kraken X to previous Kraken models?

The new Razer Kraken X is an affordable headset offer 7.1 environment audio and ultra-light condolement.

How do I connect the Razer Kraken X to my PC?

The Razer Kraken X headset can exist used with most devices that have a 3.5mm jack.

For desktop or laptop computers with combined audio jacks, y'all can simply plug in the Razer Kraken X directly.

For desktop or laptop computers equipped with separate jacks for audio output and microphone input, the included 3.5mm splitter extension cable tin can be used every bit in the illustration beneath:

Where tin I find the serial number on my Razer Kraken 10?

The serial number tin can be found on the left earcup every bit illustrated below:

How do I clean my Razer Kraken 10 headset?

We cannot say with certainty what blazon of dirt and droppings may be on your production, or how certain cleaning products may react with it, but we have had skilful luck cleaning Razer products using commonly bachelor monitor cleaning wipes. To clean the trunk of your Razer headset, please take a monitor wipe and utilize gentle wiping motions. Exercise not scrub the surface of your Razer headset. When cleaning the earpads on your headset, have actress care to non get any liquids inside the earcup and onto the speaker itself, equally this may damage your headset.

Troubleshooting

I hear echo/feedback when using my Razer Kraken X. How can I fix this?

Please try the recommendations below:

Exist sure that the microphone is fully extended when in apply. If the mic is in the stored position, it will choice upwards sounds from the earcup.
Ensure that "Listen to this device" is NOT selected under Command Panel >Sound > Recording > Properties > Heed.
Check the microphone levels at Control Console >Sound > Recording > Properties > Levels and adapt accordingly.
Ensure that merely one vocalism chat application is in employ while in-game.
Cheque that the PC is configured to use the right recording device under Command Console > Audio > Recording. Select the proper recording device, right-click on it, and select "Set Default Device" or "Select Default Communication Device".
Ensure the PC supports the combined audio jack. If not, delight use the included audio/mic splitter cablevision.

The microphone on my Razer Kraken X is overly sensitive and picks upwards sounds other than my voice. How tin I set up this?

Here are a few suggestions that may help:

Be sure that the microphone is fully extended when in use. If the mic is in the stored position, it will pick up sounds from the earcup.
Check that the PC is configured to use the correct recording device under Control Panel > Audio > Recording. Select the proper recording device, right-click on information technology, and select "Set Default Device" or "Select Default Advice Device".
Cheque the microphone levels at Control Panel >Sound > Recording > Properties > Levels and conform accordingly.
Check that the PC is configured to utilize the correct recording device under Command Panel > Sound > Recording. Select the proper recording device, right-click on information technology, and select "Set Default Device" or "Select Default Communication Device".
Under Control Panel > Sound > Communications, select "Do Nothing".
Nether Control Console > Sound > Recording > Properties > Enhancements, select "Disable all sound effects" or try a combination of enhancements that works for your setup.
Under Command Panel > Sound > Recording > Backdrop > Advanced > Default Format, select "2 aqueduct, 16 bit, 48000Hz (DVD Quality)" if available.

The microphone on my Razer Kraken X isn't sensitive plenty. It will only pick upward my voice when I turn upwardly the microphone level to max sensitivity through Windows. And, when I practice that, it adds static and distorts my vocalisation. How can I fix this?

Here are a few tips that should assistance with this outcome:

Make sure the mic diaphragm is in forepart and the air vent is facing away from your mouth.
Check that the PC is configured to employ the correct recording device under Control Panel > Sound > Recording. Select the proper recording device, right-click on it, and select "Fix Default Device" or "Select Default Communication Device".
Under Control Panel > Sound > Communications, select "Do Nothing".
Nether Control Panel > Sound > Recording > Properties > Enhancements, select "Disable all sound effects" or try a combination of enhancements that works for your setup.
Under Command Console > Sound > Recording > Backdrop > Advanced > Default Format, select "2 aqueduct, 16 bit, 48000Hz (DVD Quality)" if available.

I have no audio when using the Razer Kraken X headset.

Here are a few suggestions that may aid:

Brand certain the in-line volume control is turned upwards. Rotate the volume wheel on the in-line command to increment the book.
Cheque that the right playback device is selected under Control Panel > Audio > Playback. Select the correct device, right-click, and select "Set up as Default Device".
Cheque the figurer volume levels and make sure information technology is not muted or turned all the way down.

I cannot hear game sound when using the Razer Kraken X headset on a PS4 or Xbox One.

Hardware

Does the Razer Kraken X come up with an audio splitter for stereo output and mic input?

Yes, the Razer Kraken Ten comes with an sound splitter for stereo output and mic input.

Does the Razer Kraken Ten come with cooling gel-infused ear cushions?

No, the Razer Kraken X comes with false leather with memory foam ear cushions.

How do I mute the microphone on the Razer Kraken Ten?

The mute button is at the dorsum of the left ear cup. The microphone is muted when the button is not pressed or when the ruby-red part of the push is visible.

Source: https://support.razer.com/gaming-headsets-and-audio-1/razer-kraken-x/

Posted by: lukenrion1963.blogspot.com